Hi everyone, I recently installed the Duet 2 wifi board on my Modix Big-60 with a CR Touch (metal pin) and everything seems to be working fine. The X and Y endstops are located on the left in the back and the printer homes X, Y and Z as it should. However.. when I slice a print in Cura 4.8.0 or Simplify3D, the printer homes in the back left as expected and then rushes and crashes into the front. In order to make everything work I had to switch the X and Y on the board. To eliminate the problem I removed everything except G28 from the start-Gcode in Cura. Below my config.g, homeall.g, and everything else which could be of importance. Many thanks in advance for any input which could solve my problem. I'm getting an Akismet Spam error when trying to post so placing it all in a text file.
Best posts made by 3dorbit
-
Help! Print starts opposite of homeposted in Tuning and tweaking