Pressed the Erase Button - not booting
-
Yes, Showing up as COM4 (Bossa Program Port). When I try connecting through the GUI I am getting "Error h_handle returned zero". FYI I am using sam-ba 2.16
-
Update: I think I got it to work. I thought the board was auto-discovered but it was not. Sam-ba returned SET so I am guessing that is the confirmation?
I pressed the reset button also, but now I can't connect to the board from rep host. I feel like I missed a step. Any idea why it is not getting picked up by USB, after flashing / resetting? Also, it is not showing up in the devices under usb.
-
Did you follow the full procedure listed at https://duet3d.com/wiki/Updating_main_firmware#Fallback_procedure_.233 ?
-
I followed it. A few times just to make sure that I didn't miss a step etc.
After flashing, I moved back to the Mac, and then back again back to bootcamp win10. Both are not seeing the device. I have disconnected it. Re-flashed it. I also checked to make sure the .bin was the correct file as I saw in other threads some were downloading a container file. Seems like I have done everything correctly, hoping that it is just something I am missing and not something wrong with the board!!??
-
One Note "On completion it will invite you to lock the region; press Yes."
I never was prompted to do this? Could this potentially be an issue?
-
I did the compare sent file with memory and getting the following error:
Sent file & Memory area content (address: 0x400000, size: 265068 bytes) do not match!
from the log
[[language]] loading history file ... 0 events added SAM-BA console display active (Tcl8.5.9 / Tk8.5.9) (sam-ba_2.16) 1 % (sam-ba_2.16) 1 % compare_file {Flash} "C:/Users/--/Downloads/DuetWiFiFirmware-1.17e.bin" 0x400000 0 -I- Temp file : C:/Users/--/.sam-ba.testCompareFile -I- Compare File : C:/Users/--/Downloads/DuetWiFiFirmware-1.17e.bin with memory at address : 0x400000 , for 265068 byte(s) -I- Read File C:/Users/--/.sam-ba.testCompareFile at address 0x400000 GENERIC::ReceiveFile C:/Users/--/.sam-ba.testCompareFile : 0x40B6C bytes from address 0x0 -I- Reading: 0x10000 bytes at 0x0 (buffer addr : 0x20002128) -I- Reading: 0x10000 bytes at 0x10000 (buffer addr : 0x20002128) -I- Reading: 0x10000 bytes at 0x20000 (buffer addr : 0x20002128) -I- Reading: 0x10000 bytes at 0x30000 (buffer addr : 0x20002128) -I- Reading: 0xB6C bytes at 0x40000 (buffer addr : 0x20002128) (sam-ba_2.16) 1 %Any thoughts?
-
UPDATE! Somehow, when I was updating before, I didn't get an output or the sector lock. I went back and clicked on "compare file" I never did it because it said "if desired". The above error kept on coming so I looked up some detail on that. For whatever reason, I clicked on "send file"… it worked. Got the output, reset the board and it just connected to repetier. Was it necessary to click on compare file?
-
Alright, well I seem to have hit a wall. I can connect with Repetier but it is giving me "No start signal - forcing start". It then runs a couple GCODES and then get "communication timeout - reset send buffer block". Not really sure what to do next here. It seams that the firmware is updating. Since I pressed erase, do I have to add any other of the firmwares? The server or anything like that?
I did try uploading the firmware and the server .bin directly through sam-ba with no luck.
-
Hi.
I believe i had to run it as administrator and in compatibility mode with windows 7 to get it to work on my machine.
-
I believe i had to run it as administrator and in compatibility mode with windows 7 to get it to work on my machine.
Thanks for that tip. This should really be in the docs. I'm not a regular Windows user so I had forgotten about compatibility mode.
