Wired my DUEX5 to gnd/gnd instead of vin/gnd any damage?
-
I screwed up.
Wired up my DUEX5 with double grounds instead of vin/ground. It was a connected to a duet 2 and when I connected to the web console, it reported all drivers as shorted to ground. I immediately turned it off and saw my mistake... I've now wired it correctly and it seems like it's working but this printer is a work in progress so I was not able to test everything.
Did I damage anything that I might not be aware of yet?
-
It's unlikely that you damaged anything.
