BUG Report: wrong offset for 1st tools change

[chernogorsky]

Hi, having a multi extruder setup
and have found that in some condition tools offset does not apply for the 1st tool (only initial tool change. after a loop evr is ok)

So, my setup:
T0, T1, T2 with different offsets (G10)

after reboot, select T1
in that case tool's offsets does not apply

after a cycle (for example T-1, T1) they do

2.02(RTOS) (2018-12-24b1)

[dc42]

Please provide a config.g file and a sequence of moves that demonstrates this issue.

[chernogorsky]

upgraded to 2.03beta
cant reproduce by now. will update if hit it again

[dc42]

OK thanks.