Using a header pin to control a part cooling fan.
-
Good day,
Is it possible to use a header pin (instead of the standard PWM fan outputs) to control a PWM (0-5v) part cooling fan?
Regards,
Andre
-
Not directly, because the expansion connector outputs are 3.3v and can supply limited current. However, the latest RC firmware versions allow you to connect a fan to a heater output; so you could connect an external mosfet to one of the heater outputs on the expansion bus to drive a fan.
-
Brilliant that is pretty much what I ended up doing and it is now working.
Thank you very much.