PanelDue 4.3'' not dimming
-
To my understanding the backlight of my PanelDue should dim if the printer is idle and/or a M81 command is sent. My pannel is always lit. I have noticed that even the brightness +/- in the setup tab does not change anything. Am I missing something here?
I just flashed the latest 1.22.1(28b1) firmware.
-
Which version of PanelDue board do you have? The early ones did not support dimming.
Duet WiFi hardware designer and firmware engineer
Please do not ask me for Duet support via PM or email, use the forum
http://www.escher3d.com, https://miscsolutions.wordpress.com -
@dc42 said in PanelDue 4.3'' not dimming:
Which version of PanelDue board do you have? The early ones did not support dimming.
No clue to be honest, I bought mine secondhand from a local guy. I not at my printer for the weekend but is there an easy way to identify the version.
I just installed a permanent external 5V PSU so the PanelDue is always lit. Any way to make it dim, especially at night
? -
The version is printed on the back of the circuit board.
