Inductive sensor - Z probe returning wrong measurements
-
Do you have anything connected to the temperature daughter board connector? Do you have a DueX expansion board connected?
-
No. I did not use any of them. I have a duet Ethernet and expansion header for the drivers. Thats it.
-
Please try it without the expansion board ribbon cable connected to the Duet, in case of a problem with the cable or the expansion breakout board.
-
I tried and it did not work.
I got a new TFT panel display same one and the sd card works fine. So i think its the problem with sd card port in the previous panel.
Thanks for the swift response and support!
