My Duet Ethernet is detected as Duet Wifi.

[SEUTec]

Hi:

My Duet Ethernet is detected as DuetWifi, after firmware update.
And do not connect to the local net.

M115 command returns:
FIRMWARE_VERSION: 2.02RC2(RTOS)
ELECTRONICS: Duet WiFi 1.02 or later

I think this is the cause of error when reading the M552 command in the config.g

[dc42]

The Ethernet module has 2 rows of header pins that plug into socket strips on the Duet main board. The symptom you describe indicates that one of the pins is not connecting, probably because of a bad solder joint on either the pin header or the socket. It's the front left pin as viewed from the edge of the Duet.

[SEUTec]

Hi dc42:

Problem solved.

I have found 2 poor solderings in Ethernet module, RX, and TX pins.

Thank you very much for your support.