Pressure Advance Calibration

avion23

I've updated the *.py file with

preamble
postamble
klipper compatibility
Marlin compatibility

These are my results:
Delta Fyling extruder PA 0 - 0.5 over 40mm PLA

Delta Fyling extruder PA 0 - 0.5 over 40mm PLA carbon fiber

duosvid

I have tuned PA according to the method in the wiki, not with the script, but by printing a 100mm cube and adjusting on the fly. I have settled on 0.7, with a bowden tube of around 480mm length.

duosvid

@duosvid said in Pressure Advance Calibration:

I have tuned PA according to the method in the wiki, not with the script, but by printing a 100mm cube and adjusting on the fly. I have settled on 0.7, with a bowden tube of around 480mm length.

overall surface and z-seam look better, I'm now getting gaps in the infill - not in the parameters though . .

Phaedrux

@duosvid said in Pressure Advance Calibration:

@duosvid said in Pressure Advance Calibration:

I have tuned PA according to the method in the wiki, not with the script, but by printing a 100mm cube and adjusting on the fly. I have settled on 0.7, with a bowden tube of around 480mm length.

overall surface and z-seam look better, I'm now getting gaps in the infill - not in the parameters though . .

It's not uncommon to need to increase perimeter overlap slightly after tuning pressure advance.

tmitch205

@dc42 said in Pressure Advance Calibration:

Yes that's a valid approach. It's on our list to add a generator of pressure advance tests scripts to reprapfirmware.org, but it hasn't happened yet.

I know this is a super old thread but wanted to check anyway. Has the generator been created and added? If so, could you provide the link, please?

jay_s_uk

@tmitch205 my version of the klipper one generated RRF compatible pressure advance tests https://jaysuk.github.io/Voron/PA/pressure_advance.html

sym

Couldn't get this working, turns out Powershell encodes terminal output as UTF16LE. It will crash the Duet when you try to start it. Convert to UTF8 and smooth sailing.

Thanks!