Running Bed Mesh Compensation

[Billsrf]

This happened after I loaded the ZIP file from github link that @dc42 directed me to, to update my firmware and enable my bed mesh compensation. I downloaded the zip and then uploaded it via the DWC, thats when it went crazy. So I reinstalled my working version that I am using now.

[Billsrf]

I'm sorry for my hasty remark earlier. What am I doing wrong trying to upload the new DWC version?

[Billsrf]

@dc42 I have tried to upload from the link you gave me on get hub but it does the same crazy thing each time. What am I doing wrong???

[T3P3Tony]

@billsrf are you updating all three - the Duet Firmware, The Wifi module firmware and Duet Web control:

https://github.com/dc42/RepRapFirmware/releases/tag/2.01

Duet2CombinedFirmware.bin
DuetWebControl-1.22.zip
DuetWiFiServer-1.21.bin

[Billsrf]

No, I just uploaded the zip file for the DWC

[Billsrf]

That seems to have worked, thank you. Now, lol, how do I tell it to shut off the bed and nozzle after the print finishes and moves to X0 Y0?

[Billsrf]

Did the updating as you suggested, still have the same problem with the bed mesh compensation, still only does a 1/4 of the build plate and disables the connection to the DWC.

[dc42]

@billsrf said in Running Bed Mesh Compensation:

Did the updating as you suggested, still have the same problem with the bed mesh compensation, still only does a 1/4 of the build plate and disables the connection to the DWC.

So it stops after doing 1/4 of the build plate, and DWC disconnects: correct?

Please reconnect after this happens, run M122 and post the report here.

[Billsrf]

It will net reconnect. I have to restart the printer to reconnect.

[dc42]

In that case, please try connecting via USB. When DWC will not reconnect or refresh, send M122 via USB (e.g. from YAT or Pronterface) to get the diagnostic report, and post that here.

[Billsrf]

OK, Will Do

[Billsrf]

@dc42 here is the M122 report0_1535484057809_M122 Report.txt

[Billsrf]

@dc42 any luck?

[dc42]

The report indicates output buffer overflow and starvation. Please try firmware 2.01 or 2.02beta1, which include fixes to avoid this situation.

[Billsrf]

@dc42 I uploaded the latest firm ware and still the same issue

[Billsrf]

@dc42 I am using 1.22.1 with the Duet2combinedfirmware.bin

[dc42]

@billsrf said in Running Bed Mesh Compensation:

@dc42 I am using 1.22.1 with the Duet2combinedfirmware.bin

Latest firmware for Duet WiFi/Ethernet is 2.01, or 2.02beta1. Perhaps the 1.22.1 number you reported is the Duet Web Control version? Send M115 to check the firmware version.

[Billsrf]

@dc42

[dc42]

So you are actually running firmware version 1.21. I suspect that you have a very old version of iap4e.bin in /sys on the SD card. Try uploading the version from https://github.com/dc42/RepRapFirmware/releases/tag/2.0, then try upgrading the firmware again.

[Billsrf]

@dc42 ok thank you