Printer is now online.
>>> M122
SENDING:M122
=== Diagnostics ===
Used output buffers: 1 of 32 (32 max)
=== Platform ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 1.21 running on Duet WiFi 1.02 or later + DueX2
Board ID: 08DGM-956GU-DJMSN-6J9F2-3S06M-TBQMH
Static ram used: 16152
Dynamic ram used: 101088
Recycled dynamic ram: 1544
Stack ram used: 3576 current, 4564 maximum
Never used ram: 7724
Last reset 00:06:58 ago, cause: power up
Last software reset time unknown, reason: User, spinning module GCodes, available RAM 5824 bytes (slot 0)
Software reset code 0x0003 HFSR 0x00000000, CFSR 0x00000000, ICSR 0x0441f000, BFAR 0xe000ed38, SP 0xffffffff
Error status: 12
[ERROR] Error status: 12

Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 150.1ms
MCU temperature: min 38.5, current 41.4, max 42.1
Supply voltage: min 24.5, current 24.6, max 24.9, under voltage events: 0, over voltage events: 0
Driver 0: standstill, SG min/max 0/981
Driver 1: standstill, SG min/max 78/546
Driver 2: standstill, SG min/max 211/585
Driver 3: standstill, SG min/max not available
Driver 4: standstill, SG min/max not available
Driver 5: standstill, SG min/max not available
Driver 6: standstill, SG min/max not available
Expansion motor(s) stall indication: no
Date/time: 2018-08-28 14:18:40
Slowest main loop (seconds): 0.332378; fastest: 0.000052
=== Move ===
MaxReps: 2, StepErrors: 0, LaErrors: 0, FreeDm: 240, MinFreeDm 236, MaxWait: 2287413075ms, Underruns: 0, 0
Scheduled moves: 82, completed moves: 82
Bed compensation in use: mesh
Bed probe heights: 0.000 0.000 0.000 0.000 0.000
=== Heat ===
Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1
=== GCodes ===
Segments left: 0
Stack records: 1 allocated, 0 in use
Movement lock held by null
http is idle in state(s) 0
telnet is idle in state(s) 0
file is idle in state(s) 0
serial is ready with "M122" in state(s) 0
aux is idle in state(s) 0
daemon is idle in state(s) 0
queue is idle in state(s) 0
autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
HTTP sessions: 1 of 8
- WiFi -
Network state is running
WiFi module is connected to access point
Failed messages: pending 0, notready 0, noresp 0
WiFi firmware version 1.21RC4(08b3)
WiFi MAC address 5c:cf:7f:76:72:f2
WiFi Vcc 3.32, reset reason Power on
WiFi flash size 4194304, free heap 17088
WiFi IP address 192.168.1.4
WiFi signal strength -65dBm, reconnections 0, sleep mode modem
Socket states: 0 0 0 0 0 0 0 0
=== Expansion ===
DueX I2C errors 0