Searching for suitable firmware for chartesian 3d printer
-
i used reprap firmware 1.09 software and it does not work successfully
the main problem is that it does not home when i touch home icon in the panel due
and another reprap version is not suitable for Cartesian 3d printer … it is mainly for delta printer
can any one recomend any recent reprap version that support Cartesian
note : my kit is duet 0.8.5 -
All versions of RepRapFirmware support Cartesian printers. It is the config.g file that tells the firmware whether your printer is a Cartesian or a delta.
I suggest you install either version 1.16 or version 1.17RC2, and use the tool at https://configurator.reprapfirmware.org/ to generate new config.g and homing files to suit your printer.
-
you should probably post your config, as well as your homing files. you can update your firmware to the latest version but it has been supporting cartesian printers for a long time. It sounds like your config.g files need work.
-
See: https://duet3d.com/wiki/Where_to_get_Duet_and_Duet_WiFi_firmware_and_tools
Direct link to the latest stable version: https://github.com/dc42/RepRapFirmware/tree/dev/Release/Duet-0.6-0.8.5/Stable
Also download the duetwebcontrol file, it needs to be installed also.
