Switching Bed.g files
-
Hi all,
Is there a way to easily switch between bed.g files?
I have a bed that is 320 mm diameter.
Every now and then I put a steel plate with Buildtak on it. The buildtak is only 200x200 mm square
So I want to use different probe points.This means two Bed.g files, right? Or can I define different probe points in the same file and with a parameter do 1 check or the other?
I know, it is probably a very rare issue, but still, I have to ask.
I was thinking of switching out the files, but that is cumbersome. -
The only thing that is special about bed.g is that it is run in response to a G32 command. So you can create additional files with the same structure and invoke them as macros using M98.
-
The other thing you might want to add to that macro (or another macro) is to redefine the bed size (axes minima and maxima) using M208. Just a thought….....