smart effector not working
-
Out of interest, have you ever had a probe working on your Duet, and which revision of the Duet do you have? I got caught out by the fact that there are differences in the pinout on the Duet's probe connector depending on the revision. My (white) prototype board has the opposite pinout to the (blue) production board.
Diagrams showing both are available here:
https://duet3d.dozuki.com/Wiki/Duet_Wiring_Diagrams
adavidm
-
@monster-delta said in smart effector not working:
The green light does flash randomly without any kind of pattern to it
If it flashes randomly with no heaters or fans turned on, and you haven't increased the sensitivity, that suggests a hardware fault - possibly in the effector, but more likely a bad crimp connection in the +3.3V or ground wire between the 8-pin connector and the Duet.
