Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Custom Drive Mapping stopped working

    Tuning and tweaking
    3
    12
    1.2k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • PropellerHatundefined
      PropellerHat
      last edited by

      Hi

      I added yesterday a second extruder in my machine and suddenly things got really weird. Looks like the M584 line does not work anymore. Here is my config.g:

      ; General preferences
      M111 S0 ; Debugging off
      G21 ; Work in millimetres
      G90 ; Send absolute coordinates...
      M83 ; ...but relative extruder moves
      M555 P2 ; Set firmware compatibility to look like Marlin
      M208 X0 Y0 Z0 S1 ; Set axis minima
      M208 X900 Y800 Z800 S0 ; Set axis maxima

      ; Endstops
      M574 X1 Y1 Z1 S1 ; Define active high microswitches
      M558 P0 X0 Y0 Z0 H5 F120 T6000 ; Set Z probe type to switch, the axes for which it is used and the probe + travel speeds
      ;G31 P600 X0 Y0 Z2.5 ; Set Z probe trigger value, offset and trigger height
      ;M557 X15:885 Y15:785 S20 ; Define mesh grid

      ; Drives (Tn for longer pulse)
      M569 P0 S0 ; Drive 0 goes forwards X
      M569 P1 S0 ; Drive 1 goes forwards Y
      M569 P2 S1 ; Drive 2 goes forwards
      M569 P3 S1 ; Drive 3 goes forwards
      M569 P4 S1 ; Drive 4 goes forwards
      M569 P5 S0 ; Drive 5 goes forwards Y
      M569 P6 S1 ; Drive 6 goes forwards
      M569 P7 S1 ; Drive 7 goes forwards
      M569 P8 S1 ; Drive 8 goes forwards

      M584 X0 Y1:5 Z6:7:8:9 E2:3:4 ; Apply custom drive mapping

      M350 X16 Y32 Z4 E16:16:16:16 I0 ; Configure microstepping without interpolation

      ;M92 X80.1 Y40.1 Z180.4 E570:570:570:570 ; Set steps per mm
      M92 X160 Y160 Z180 E570:570:570:570 STEPS PER MM

      M566 X1200 Y1000 Z5 E5000:5000:5000:5000:5000:5000 ; Set maximum instantaneous speed changes (mm/min) “JERK”
      M203 X18000 Y18000 Z250 E1200:1200:1200:1200:1200:1200 ; Set maximum speeds (mm/min) SPEED
      M201 X700 Y700 Z100 E250:250:250:250:250:250 ; Set accelerations (mm/s^2) “ACCELERATION”
      M906 X1900 Y1900 Z1900 E500 I30 ; Set motor currents (mA) and motor idle factor in per cent

      M84 S30 ; Set idle timeout

      ; Heaters
      M143 S280 ; Set maximum heater temperature

      M305 P0 T100000 B4138 C0 R4700 ; Set thermistor + ADC parameters for heater 0

      M305 P1 T100000 B4138 C0 R4700 H-40 L-100 ; Set thermistor + ADC parameters for heater 1
      M307 H1 A528.3 C226.8 D5.3 B0 ; Autotune
      M143 H1 S300

      M305 P2 T100000 B4138 C0 R4700 H-40 L-100 ; Set thermistor + ADC parameters for heater 2
      M307 H2 A477.7 C209 D4 B0 ; Autotune
      M143 H2 S300

      M305 P3 T100000 B4138 C0 R4700 H-40 L-100 ; Set thermistor + ADC parameters for heater 3
      M307 H3 A491.8 C198.5 D5,1 B0 ; Autotune
      M143 H3 S300

      M305 P4 T100000 B4138 C0 R4700 H-40 L-100 ; Set thermistor + ADC parameters for heater 4
      M307 H4 A623.1 C198.6 D5 B0 ; Autotune
      M143 H4 S300

      ; Tools

      M563 P0 D0 H1 ; Define tool 0
      M567 P0 E1
      ;G10 P0 X0 Y0 Z0 ; Set tool 0 axis offsets
      ;G10 P0 R0 S0 ; Set initial tool 0 active and standby temperatures to 0C
      M568 P0 S1 ; TURN MIXING RATIOS ON

      M563 P1 D0:1 H1:2 ; Define tool 1
      M567 P1 E1:1
      ;G10 P1 X0 Y0 Z0 ; Set tool 1 axis offsets
      ;G10 P1 R0 S0 ; Set initial tool 1 active and standby temperatures to 0C
      M568 P1 S1 ; TURN MIXING RATIOS ON

      M563 P2 D0:1:2 H1:2:3 ; Define tool 2
      M567 P2 E1:1:1
      ;G10 P2 X0 Y0 Z0 ; Set tool 2 axis offsets
      ;G10 P2 R0 S0 ; Set initial tool 2 active and standby temperatures to 0C
      M568 P2 S1 ; TURN MIXING RATIOS ON

      M563 P3 D0:1:2:3 H1:2:3:4 ; Define tool 3;
      M567 P3 E1:1:1:1 ; MIXING RATIO
      ;G10 P3 X0 Y0 Z0 ; Set tool 3 axis offsets
      ;G10 P3 R0 S0 ; Set initial tool 3 active and standby temperatures to 0C
      M568 P3 S1 ; TURN MIXING RATIOS ON

      M563 P4 D1 H2 ; Define tool 4
      M567 P4 E1
      ;G10 P4 X0 Y0 Z0 ; Set tool 0 axis offsets
      ;G10 P4 R0 S0 ; Set initial tool 0 active and standby temperatures to 0C
      M568 P4 S1 ; TURN MIXING RATIOS ON

      M563 P5 D0:2:3 H1:3:4 ; Define tool 5;
      M567 P5 E1:1:1 ; MIXING RATIO
      ;G10 P5 X0 Y0 Z0 ; Set tool 3 axis offsets
      ;G10 P5 R0 S0 ; Set initial tool 5 active and standby temperatures to 0C
      M568 P5 S1 ; TURN MIXING RATIOS ON

      M563 P6 D1:2:3 H2:3:4 ; Define tool 6;
      M567 P6 E1:1:1 ; MIXING RATIO
      ;G10 P6 X0 Y0 Z0 ; Set tool 3 axis offsets
      ;G10 P6 R0 S0 ; Set initial tool 3 active and standby temperatures to 0C
      M568 P6 S1 ; TURN MIXING RATIOS ON

      M563 P7 D1:3 H2:4 ; Define tool 7;
      M567 P7 E1:1 ; MIXING RATIO
      ;G10 P7 X0 Y0 Z0 ; Set tool 3 axis offsets
      ;G10 P7 R0 S0 ; Set initial tool 3 active and standby temperatures to 0C
      M568 P7 S1 ; TURN MIXING RATIOS ON

      M563 P8 D2:3 H2:3 ; Define tool 8;
      M567 P8 E1:1 ; MIXING RATIO
      ;G10 P8 X0 Y0 Z0 ; Set tool 3 axis offsets
      ;G10 P8 R0 S0 ; Set initial tool 3 active and standby temperatures to 0C
      ;M568 P8 S1 ; TURN MIXING RATIOS ON

      ; Network
      M550 PLSBP Mk4 ; Set machine name
      M540 PBE:EF:DE:AD:FE:ED ; Set MAC address
      M552 P0.0.0.0 S1 ; Enable network and acquire dynamic address via DHCP
      M586 P0 S1 ; Enable HTTP
      M586 P1 S0 ; Disable FTP
      M586 P2 S0 ; Disable Telnet

      ; Fans
      M106 P0 S1 I0 F500 H-1 ; Set fan 0 value, PWM signal inversion and frequency. Thermostatic control is turned off
      M106 P1 S1 I0 F500 H-1 ; Set fan 1 value, PWM signal inversion and frequency. Thermostatic control is turned off
      M106 P2 S1 I0 F500 H-1 ; Set fan 2 value, PWM signal inversion and frequency. Thermostatic control is turned off

      I have tried for hours to make it work but now I don't know what to try anymore. Only one side of my dual motor Y is moving (the one connected on drive 1) and trying to move Z has moved the extruder motor connected on driver 2. X works since it is in drive 0.

      If somebody sees the problem it would really make my day!

      thanks!

      PropellerHatundefined 1 Reply Last reply Reply Quote 0
      • PropellerHatundefined
        PropellerHat @PropellerHat
        last edited by

        @propellerhat Oh yes, I tried also putting the custom mapping in the macros and commanding it separately after the startup. No effect.

        PropellerHatundefined 1 Reply Last reply Reply Quote 0
        • PropellerHatundefined
          PropellerHat @PropellerHat
          last edited by

          @propellerhat Also tried without the tool configurating and with only the tools that were working configurated in the config.g before the changes. No help.

          1 Reply Last reply Reply Quote 0
          • PropellerHatundefined
            PropellerHat
            last edited by

            I also moved the M208 next to movement lines but no help.

            1 Reply Last reply Reply Quote 0
            • Catalin_ROundefined
              Catalin_RO
              last edited by

              Just wondering.... M584 defines 3 extruders, for drives 2, 3 and 4. In many places the E parameter is followed by 4 values, like the M350 and M92 codes. Have you tried insuring that you don't have more than 3 values for any E parameter present in the file?

              PropellerHatundefined 1 Reply Last reply Reply Quote 0
              • PropellerHatundefined
                PropellerHat @Catalin_RO
                last edited by

                Removed now all the extra E parameters from M566,M203 and M201. Also the tools are cleaned from everything else than T8.

                Still same behaviour 😞

                1 Reply Last reply Reply Quote 0
                • PropellerHatundefined
                  PropellerHat
                  last edited by

                  Now updated the firmware to 1.21. It has been a while since updating it. After the successfull in-app update from the SD card nothing moves.

                  PropellerHatundefined 1 Reply Last reply Reply Quote 0
                  • PropellerHatundefined
                    PropellerHat @PropellerHat
                    last edited by

                    Now when trying to move the axes I get this in the console: "G0/G1: insufficient axes homed"

                    1 Reply Last reply Reply Quote 0
                    • Catalin_ROundefined
                      Catalin_RO
                      last edited by

                      Firmware 1.21 requires all axis to be homed before allowing movements in order to properly enforce actual machine area. There are workarounds, just search the forum.

                      PropellerHatundefined 1 Reply Last reply Reply Quote 0
                      • PropellerHatundefined
                        PropellerHat @Catalin_RO
                        last edited by

                        M564 H0 got the things in movement, pity that exactly the same problem remains as before updating.

                        Drive custom mapping doing nothing.

                        1 Reply Last reply Reply Quote 0
                        • dc42undefined
                          dc42 administrators
                          last edited by

                          If you run M584 from the command line, what does it report?

                          Duet WiFi hardware designer and firmware engineer
                          Please do not ask me for Duet support via PM or email, use the forum
                          http://www.escher3d.com, https://miscsolutions.wordpress.com

                          1 Reply Last reply Reply Quote 0
                          • PropellerHatundefined
                            PropellerHat
                            last edited by

                            Oh heck... Just found the flat between Duet and Duex being a tad loose. Stuff making a lot more sense now after pushing that corner in.

                            1 Reply Last reply Reply Quote 0
                            • First post
                              Last post
                            Unless otherwise noted, all forum content is licensed under CC-BY-SA