Would this method of adding an antenna work?
-
Would something like this work for adding an external antenna without desoldering out the entire wifi module and replacing it?
-
This post is deleted! -
This post is deleted! -
Unlikely. The impedance of the coax won't match where you solder it to the antenna so you would lose lots of the TX energy before it even entered the coax
-
That wont work unless you get extremely lucky for the reasons that @TickTock already mentioned. We have tested the Duet with the ESP07 which has an external antenna port. That is the way I recommend going if you need an external antenna.
-
@t3p3tony said in Would this method of adding an antenna work?:
That wont work unless you get extremely lucky for the reasons that @TickTock already mentioned. We have tested the Duet with the ESP07 which has an external antenna port. That is the way I recommend going if you need an external antenna.
That should be ESP-07S, not ESP-07.
-
Alright thanks all, I already ordered the module since it was only ~$4. I still didn't decide if I should do it or not, as it looks a bit risky.