External temperature controller, how config?
-
My develop machine have only 1 extruder,
This extruder is controlled for a external temperature/heater controller.
The duet3d not read the temperature so, show 2000º.
The question is:
How configure the board but than permitme move the extruder?
Actually like read 2000º give me errorDuetethernet 1.21
Thanks!
-
do you want to disable temperature reading at all
OR you want to print even if it shows 2000 deg ?
-
In your M563 tool definition commands, don't declare any heaters (no H parameter).
