Squeaky Balls !

[JuJuDelta]

Hi,

I have a T3DP3D Kossel XL+ with Haydn rods and magnetic balls.
When printing slowly the Delrin cup and magnetic ball interfaces creak and squeak and groan.

Is it advisable or necessary to lubricate these ?
If so with what, graphite dust ?
On oil or grease might attract dust.

Thanks,
J.

[DjDemonD]

I've used a small wipe with lithium grease and have no problems with it.

[JuJuDelta]

Thanks.
I'll grease 'em up !

[dc42]

I used silicone grease on mine.