Delta 200

jerry426

Here's mine:

In the group photo it is the small black/red one. The other 3 all have Duet 0.8.5 and I predict they will all be running Duet WiFi soon just because it makes FAR less noise.

T3P3Tony

Nice!

(off topic) how are you finding the split bottom corners for frame assembly? Is the advantage just that they are easier to print?

Cheers

Tony

jerry426

@T3P3Tony:

Nice!

(off topic) how are you finding the split bottom corners for frame assembly? Is the advantage just that they are easier to print?

Cheers

Tony

Thanks.

I was simply wanting to double up on the bottom structure for what little extra rigidity it would provide and to give me plenty of space in there for power supply and other components - so you guessed correctly about being somewhat easier - I only need to print a single part design for all 9 corner pieces. As you can see in the photos, I downsized the lower section of my new 200mm delta to use 20x20 and designed the 20mm corner piece for it. As far as assembly goes, it is just enough of a challenge to get the two lower sections to be perfectly parallel to each other that I am going to design an all-in-one corner which will make the bottom of the printer easier to assemble.