Extrusion factor not 'sticking'
-
Hey,
If I try and change the extrusion factor from my PanelDue display, I can change the value and then push "set". The new value % shows for a split second, but then reverts back to the previous value.
I can confirm the new value has not been applied, as it is not updated in the web interface.
If I update the extrusion factor from the web interface, then this is immediately reflected on the PanelDue.
Any ideas why this is the case?
-
Which PanelDue firmware version are you using, and is it extruder 0 or a different extruder? A bug in this area was fixed recently.
-
I'm using 1.20beta1 on PanelDue 7…connected by 4 core cable....everything else seems to work perfectly.
It's Extruder 0.
-
Thanks, I've reproduced the problem. I hope to release a new beta today.
-
Thanks! Saw the firmware release post, will try tonight.
-
Confirmed fixed with the new PanelDue firmware…thanks David!