D-Bot Vs. Anycubic i3 Mega

[AS-3D Druck]

Hey Guys,

i've got currently from my Dad a Anycubic i3 Mega and compare it currently to my D-Bot Core XY.
One thing that i noticed realy fast that it prints Faster (the Anycubic) then my Printer.

Here are my Settings for the D-Bot (Duet Wifi):
https://i.gyazo.com/8dee893091ddd3aea78f6d47adebb6f1.png

And those are the Settings that i've found for the latest Version for the Anycubic:
https://github.com/ANYCUBIC-3D/I3-MEGA/blob/master/Marlin_TFT_CR_V1.1.1/Configuration.h

I would say the Anycubic is about 30-40% faster but it should only print 45mm/s.
Did i made something wrong on my D-Bot???

[dc42]

Your D-bot XY accelerations are rather low, 500/500 mm/sec^2 compared to 3000/2000 on the Anycubic.

[AS-3D Druck]

Ups… what would you recomend?
It's a Bowden Printer

[dc42]

Try 1000, and if that works well try 2000.