Help with new setup please
-
I just got a replacement duet wifi2 board and upgraded it to reprap 3.5 I am setting it up and am having difficulties getting the axis right. It isn't letting me home them. I have a Folgertech FT-5 with Duet wifi 2 board and a BLtouch. Any help is appreciated
-
undefined T3P3Tony referenced this topic
-
@troydeming we need ore information to help you, please see:
https://forum.duet3d.com/topic/5909/guide-for-posting-requests-for-help
-
@T3P3Tony
i tried to put in my config.g but it wont let me it says that I need more reputation first? -
-
I am reposting your config.g here so its easier to read (use the </> button to post gcode etc so its formatted and easy to read:
; Accessories M575 P1 S0 B57600 ; configure PanelDue support ; Network M552 S1 ; configure WiFi adapter M586 P0 S1 ; configure HTTP ; Smart Drivers M569 P0 S1 D2 ; driver 0 goes Forwards(X axis)(s0- back s1-fwd) M569 P1 S1 D2 ; driver 1 goes Forwards (Y axis) M569 P2 S0 D2 ; driver 2 goes Backwards (Z axis) M569 P3 S0 D2 ; driver 3 goes Backwards (extruder 0) ; Motor Idle Current Reduction M906 I30 ; set motor current idle factor M84 S30 ; set motor current idle timeout ; Axes M584 X2 Y1 Z0 ; set axis mapping M350 X16 Y16 Z16 I1 ; configure microstepping with interpolation M906 X800 Y800 Z800 ; set axis driver currents M92 X160 Y160 Z800 ; configure steps per mm M208 X0:300 Y0:300 Z0:400 ; set minimum and maximum axis limits M566 X900 Y900 Z12 ; set maximum instantaneous speed changes (mm/min) M203 X6000 Y6000 Z180 ; set maximum speeds (mm/min) M201 X500 Y500 Z250 ; set accelerations (mm/s^2) ; Extruders M584 E3 ; set extruder mapping M350 E16 I1 ; configure microstepping with interpolation M906 E800 ; set extruder driver currents M92 E420 ; configure steps per mm M566 E120 ; set maximum instantaneous speed changes (mm/min) M203 E3600 ; set maximum speeds (mm/min) M201 E250 ; set accelerations (mm/s^2) ; Kinematics M669 K0 ; configure Cartesian kinematics ; Probes M558 P9 C"^zprobe.in" H5 F120 T6000 ; configure BLTouch probe via slot #0 G31 P500 X5 Y15 Z0.7 ; set Z probe trigger value, offset and trigger height M950 S0 C"exp.heater3" ; create servo #0 for BLtouch ; Endstops M574 X1 P"!xstop" S1 ; configure X axis endstop M574 Y1 P"!ystop" S1 ; configure Y axis endstop M574 Z1 S2 ; configure Z axis endstop ; Mesh Bed Compensation M557 X25:275 Y25:275 S40:40 ; define grid for mesh bed compensation ; Sensors M308 S0 P"bedtemp" Y"thermistor" A"Heated Bed" T100000 B4725 C7.06e-8 ; configure sensor #0 M308 S1 P"e0temp" Y"thermistor" A"Nozzle" T100000 B4725 C7.06e-8 ; configure sensor #1 ; Heaters M950 H0 C"bedheat" T0 ; create heater #0 M143 H0 P0 T0 C0 S140 A0 ; configure heater monitor #0 for heater #0 M307 H0 R2.43 D5.5 E1.35 K0.56 B1 ; configure model of heater #0 M950 H1 C"e0heat" T1 ; create heater #1 M143 H1 P0 T1 C0 S350 A0 ; configure heater monitor #0 for heater #1 M307 H1 R2.43 D5.5 E1.35 K0.56 B0 ; configure model of heater #1 ; Heated beds M140 P0 H0 ; configure heated bed #0 ; Fans M950 F0 C"fan0" ; create fan #0 M106 P0 S0 L0 X1 B0.1 ; configure fan #0 M950 F1 C"fan2" ; create fan #1 M106 P1 S0 B0.1 H1 T45 ; configure fan #1 ; Tools M563 P0 D0 H1 F0 ; create tool #0 M568 P0 R0 S0 ; set initial tool #0 active and standby temperatures toTry following this documentation:
https://docs.duet3d.com/User_manual/Connecting_hardware/Sensors_endstops#test-endstop-switches
and then:https://docs.duet3d.com/en/User_manual/Connecting_hardware/Sensors_testing
-
So when I try to home x using g29 x or hitting the home button or the home all button the x will move in the correct direction but stops after about 10 mm.
-
@troydeming said in Help with new setup please:
So when I try to home x using g29 x or hitting the home button or the home all button the x will move in the correct direction but stops after about 10 mm.
You don't use G29 to home, you use G28.
Please post your homing files AND be sure and use the </> tag to paste them right into your post so we can all see them without having to download files.
Frederick
