3.6.0-beta.3+1 halted mid print

[kozmobot]

Duet 2 WiFi/Ethernet version 3.6.0-beta.3+1

Hi,
I want to report a step timing error mid print:

Error: Movement halted because a step timing error occurred on drive 2 (code 2). Please reset the controller.
Error: Extra info=-0.00781250

[T3P3Tony]

@kozmobot thanks for reporting that. Can you update to 3.6beta3+2 and see if it occurs again and these is extra reporting in that.

https://www.dropbox.com/scl/fo/qfbfahaqybkdbsomweh3y/AOvPK9QzWWQZ4OCVwByASWk?rlkey=r2rqkt2xire46r5brvmeurkx6&dl=0.

[kozmobot]

@T3P3Tony thanks, I'll test

[T3P3Tony]

@kozmobot updated 3.5beta3+3 here:

https://www.dropbox.com/scl/fo/6kzcptwlzxyxvqrhzerpr/APNj3xtVrWJTRWzfOfN_3w8?rlkey=jprfnwuz0n3fqt3q68erpo536&dl=0

[DaveA]

@T3P3Tony I updated to the most recent +3 and on my first print it failed with a message on the console.
Error: Code 2 move error: info=-0.00195, seg: s=2467229762 t=11130 d=-29.00 u=-3.1414e-3 a=9.6290e-8 f=09

M122 included
console (1).txt

Edited to add a second attempt to print:
Error: Code 2 move error: info=-0.00195, seg: s=2255125801 t=11176 d=-25.00 u=-2.6995e-3 a=8.2784e-8 f=08

[T3P3Tony]

@DaveA thanks for the report. I will flag it to @dc4.

[dc42]

@DaveA thanks for your report. I've added it to https://github.com/Duet3D/RepRapFirmware/issues/1071. We intend to resolve this in 3.6.0-rc.1.

dc42 created this issue in Duet3D/RepRapFirmware

open Code 2 halts reported using 3.6.0-beta.2 #1071