3.6.b3 mainboards as expansion boards disconnect during printing

[dc42]

@aetherialdesign the fix for this is currently being tested.

[dc42]

@aetherialdesign please try this unofficial firmware build. Scratch that, there appears to be a second issue.

[dc42]

@aetherialdesign please test this 6HC firmware build.
Duet3Firmware_MB6HC.bin

[aetherialdesign]

@dc42 That seems to have potentially done the trick! Its at least going into the print status and staying connected throughout so far.
DWC still doesn't show bed temp; will have to poke around about that as it is likely something in the macro workflows.
Edit:
Tools disappearing and temps not being set in DWC were due to some DWC settings that somehow got toggled at some point in time.
Have run several short test prints without any further disconnects now.

[T3P3Tony]

@aetherialdesign thanks for reporting the fix appears to have worked. I am closing the github issue we opened for this:
https://github.com/Duet3D/RepRapFirmware/issues/1081

T3P3 created this issue in Duet3D/RepRapFirmware

closed 3.6.b3 mainboards as expansion boards disconnect during printing #1081