How do I clear a Heater Fault?

[Yonkiman]

I'm debugging a heater fault issue on my Duet Wifi. What's the simplest way to clear a Heater Fault (don't want to reset the board)?

[dc42]

https://duet3d.com/wiki/G-code#M562:_Reset_temperature_fault

[Yonkiman]

Thanks, but I should have been more clear: Is there a way to clear it and re-enable it without de-selecting and selecting the tool again (which causes tpost.g, tpre.g, etc.) to run?

[dc42]

You can prevent the tool change files running by using parameter P0 on the T commands.

[Yonkiman]

Thanks!