Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Solved RRF[3.5.1]/RRF[3.5.0] : Gcode bad command error

    General Discussion
    4
    12
    307
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • chrishammundefined
      chrishamm administrators @JayT
      last edited by

      @JayT What board do you have and can you share the affected G-code file?

      Duet software engineer

      JayTundefined 1 Reply Last reply Reply Quote 0
      • JayTundefined
        JayT @chrishamm
        last edited by

        @chrishamm :

        I am using Duet 2 wifi. Will share a few gcode files. As stated, this problem isn't in 3.5 RC4 much.
        I am not able to upload gcode file directly. How do I share?.

        Phaedruxundefined 1 Reply Last reply Reply Quote 0
        • Phaedruxundefined
          Phaedrux Moderator @JayT
          last edited by

          @JayT said in RRF[3.5.1]/RRF[3.5.0] : Gcode bad command error:

          How do I share?.

          dropbox or some sort of cloud storage if it's too large to upload

          Z-Bot CoreXY Build | Thingiverse Profile

          JayTundefined 1 Reply Last reply Reply Quote 0
          • JayTundefined
            JayT @Phaedrux
            last edited by JayT

            @Phaedrux : @chrishamm : It uploaded well please see with RRF 3.5.1version.

            1. 30mmTestCube_44MIN.gcode
            2. CFFFP_Flex_Dino_Keychain.gcode
            3. PCB COVER_500_5_15H.gcode
            droftartsundefined 1 Reply Last reply Reply Quote 0
            • droftartsundefined
              droftarts administrators @JayT
              last edited by

              @JayT this sounds more like an SD card reading problem. Check SD card isn’t nearly full, back it up, then reformat it or try a fresh SD card. See https://docs.duet3d.com/en/User_manual/RepRapFirmware/SD_card#troubleshooting-sd-card-issues

              Ian

              Cartesian bed-slinger with Duet 3 Mini 5+ WiFi and 1LC : RRP Fisher Delta v1 with Duet 2 Maestro : TronXY X5S with Duet 3 MB6HC and Roto toolboard

              JayTundefined 1 Reply Last reply Reply Quote 0
              • JayTundefined
                JayT @droftarts
                last edited by JayT

                @droftarts :
                I will check on this , however...If its SD card issue, then why don't I get same problem when I flash 3.5 RC4/3 or on older version of RRF, for the same gcode file?
                Can you try to simulate them in your printer with RRF3.5.1 for once, with Duet 2 wifi?

                droftartsundefined 1 Reply Last reply Reply Quote 0
                • droftartsundefined
                  droftarts administrators @JayT
                  last edited by

                  @JayT I need to do a test Duet 2 setup next week anyway (I don’t have any printers running Duet 2 any more, only a 2D plotter), so will try simulating your files then.

                  Can you share your config.g, and any other files that config.g depends on (ie macros called) and daemon.g if used? Then I can set my Duet up the same, just with nothing physically connected.

                  In the meantime, try a different SD card. I don’t know if there’s been any changes to the SD card read/write code between 3.5.1 and older firmware that makes marginal cards fail, but there may be.

                  Ian

                  Cartesian bed-slinger with Duet 3 Mini 5+ WiFi and 1LC : RRP Fisher Delta v1 with Duet 2 Maestro : TronXY X5S with Duet 3 MB6HC and Roto toolboard

                  JayTundefined 1 Reply Last reply Reply Quote 1
                  • JayTundefined
                    JayT @droftarts
                    last edited by droftarts

                    @droftarts : Please see config below. I am not using daemon.g

                    ; General preferences

G90                                                  
M83                                                 
M550 P"INFD300s"                                     
M551 P"INFD300"                                      

; Network
;M552 S1                                                                                          
M552 S-1
M586 P0 S1                                           
M586 P1 S0                                          
M586 P2 S0                                           

; Drives
M569 P0 S1                                           
M569 P1 S1                                           
M569 P2 S1                                           
M569 P3 S1 
M569 P4 S1 
M569 P5 S1   
M584 X0 Y1 Z2:3:4 E5                                    
M350 X32 Y32 I0                                        
M350 Z16 E16 I1                                      
M92 X160.0 Y160.0 Z2133.33 E932.00  
;change as per machine                   
M566 X720.00 Y720.00 Z300.00 E600.00                       
M203 X8400.00 Y8400.00 Z420.00 E8400.00          
M201 X3000.00 Y3000.00 Z30.00 E250.00                
;M-curr 
M906 X2200 Y2200 Z1600 E800 I50                      
M84 S30                                              

; Axis Limits
M208 X0 Y0 Z0 S1                                     
M208 X300 Y300 Z304.1 S0                               

; filament Sensor                           
M591 D0 P7 C"exp.e3stop" R15:300 L7 E17 S1            

; Endstops
M574 X1 S1 P"xstop"                                 
M574 Y1 S1 P"ystop"                                
M574 Z1 S1 P"zstop+e0_stop+e1_stop"                                 

; Z-Probe
M950 S0 C"exp.heater3"                               
M558 P9 C"^zprobe.in" H5 F120 T6000  
                   
G31 P500 X0 Y0 Z1.038

; Auto level, coordinates as per motor order in M584 
M671 X-17.66:297.34:140.00 Y-5.00:-5.00:327.61 S5.0  ;points position with left right &center

; define mesh grid                           
M557 X30:300 Y30:300 S20   
M376 H5                        
		
; End Limits 
M950 J1 C"exp.e4stop"  				   	 
M581 P1 T2 R0 S1                                     			     
M582 T2							     
M581 P-1 T2	                                         				     
M581 P1 T0 R0 S1                                    

;PA
M572 D0 S0.055		                             

; Bed Heater
M308 S0 P"bedtemp" Y"thermistor" T100000 B4138       
M950 H0 C"bedheat" T0                                
M307 H0 B0 S1.00                                     
M140 H0                                             
M143 H0 S105                                         

; Extuder Heater
M308 S1 P"e0temp" Y"pt1000"                          
M950 H1 C"e0heat" T1                                 
M307 H1 B0 S1.00                                      
M143 H1 S320                                         

; cooling Fans
M950 F0 C"fan0" Q500                                 
M106 P0 S0 H-1                                       
M950 F1 C"fan1" Q500                                 
M106 P1 S0 H-1                                       

; Tools
M563 P0 D0 H1 F0                                    
G10 P0 X0 Y0 Z0                                      
G10 P0 R0 S0                         
; Miscellaneous
M575 P1 S1 B57600                                   
M501                                                
M911 S21 R22.5 P"M913 X0 Y0 G91 M83 G1 Z5 E-5 F1000"   
M929 S3 P"/macros/log/DEBUG.txt"        
M17
                    droftartsundefined 1 Reply Last reply Reply Quote 0
                    • droftartsundefined
                      droftarts administrators @JayT
                      last edited by

                      @JayT said in RRF[3.5.1]/RRF[3.5.0] : Gcode bad command error:

                      ; Network
                      ;M552 S1
                      M552 S-1

                      I notice you are not enabling networking. Are you running the simulation from a PanelDue?

                      M929 S3 P"/macros/log/DEBUG.txt"

                      Is there a reason you're running debug logging? This will impact performance, and means a lot of writes to the SD card. It could be that the level of logging has increased in 3.5.1, and is causing what was a marginal problem on the SD card to become a real one.

                      I set up a bench test, with a Duet 2 WiFi on RRF 3.5.1 and PanelDue, powered by USB, with your config.g. I enabled networking. I simulated all three files, which all completed fine.

                      08/05/2024, 16:24:30 	M37 P"0:/gcodes/1714799702668-30mmtestcube_44min.gcode"
Simulating print of file 0:/gcodes/1714799702668-30mmtestcube_44min.gcode
08/05/2024, 16:24:35 	File 0:/gcodes/1714799702668-30mmtestcube_44min.gcode will print in 0h 45m plus heating time
08/05/2024, 16:24:50 	M37 P"0:/gcodes/1714799702737-cfffp_flex_dino_keychain.gcode"
Simulating print of file 0:/gcodes/1714799702737-cfffp_flex_dino_keychain.gcode
08/05/2024, 16:26:36 	File 0:/gcodes/1714799702737-cfffp_flex_dino_keychain.gcode will print in 1h 31m plus heating time
08/05/2024, 16:26:48 	M37 P"0:/gcodes/1714799702831-pcb-cover_500_5_15h.gcode"
Simulating print of file 0:/gcodes/1714799702831-pcb-cover_500_5_15h.gcode
08/05/2024, 16:29:41 	File 0:/gcodes/1714799702831-pcb-cover_500_5_15h.gcode will print in 5h 44m plus heating time

                      Looking at the DEBUG.txt file the logging created, there's a lot of writes during simulation. I think this is causing a degraded SD card problems. Please try with a new SD card.

                      Ian

                      Cartesian bed-slinger with Duet 3 Mini 5+ WiFi and 1LC : RRP Fisher Delta v1 with Duet 2 Maestro : TronXY X5S with Duet 3 MB6HC and Roto toolboard

                      JayTundefined 1 Reply Last reply Reply Quote 1
                      • Phaedruxundefined Phaedrux marked this topic as a question
                      • JayTundefined
                        JayT @droftarts
                        last edited by JayT

                        @droftarts :

                        @droftarts said in RRF[3.5.1]/RRF[3.5.0] : Gcode bad command error:

                        I notice you are not enabling networking. Are you running the simulation from a PanelDue?

                        Yes, I ran simulation via PanelDue, not from DWC.
                        Thanks for trying. If gcode simulated well, ***Will try with new SD card.

                        @droftarts said in RRF[3.5.1]/RRF[3.5.0] : Gcode bad command error:

                        Is there a reason you're running debug logging? This will impact performance, and means a lot of writes to the SD card. It could be that the level of logging has increased in 3.5.1, and is causing what was a marginal problem on the SD card to become a real one.

                        Is that so for 3.5.1? I am writing to SD card with debugging enabled, to debug problems if faced during printing. This log file helps me to understand at times if the print fails or there are problems w.r.t gcode, if dwc isn't connected.
                        What solution do you propose then? Is there a way to create log some other memory place?

                        JayTundefined 1 Reply Last reply Reply Quote 0
                        • JayTundefined
                          JayT @JayT
                          last edited by JayT

                          @droftarts :
                          I see this is happening only with 1/2 versions of cura generated Gcode. If I use latest Cura version gcode, I don't see this problem much. However, I will see if stopping the log , helps anyway.
                          Also, I do see that this problem does not appear in previous versions of RRF. May be something is changed w.r.t certain gcode interpretation.

                          @Phaedrux : Please mark this as solved.

                          1 Reply Last reply Reply Quote 0
                          • droftartsundefined droftarts has marked this topic as solved
                          • First post
                            Last post
                          Unless otherwise noted, all forum content is licensed under CC-BY-SA