Checking known issues with 3.4.6?
-
I've spotted a non ideal behaviour with 3.4.6. Before I put much time into seeing ifnit is repeatable what is the best way of finding out if it has already been spotted? Just read release notes of the neta releases since &/or an issues list on github?
-
@DocTrucker Yes, if you'd rather not run a 3.5 beta/rc version (there have been a lot of changes), see the release notes for 3.4.7 (in preparation) here https://github.com/Duet3D/RepRapFirmware/wiki/Changelog-RRF-3.x
For changes from 3.4.6 to the current 3.5.0-rc.2, you need to look at both the beta and rc version release notes; see https://github.com/Duet3D/RepRapFirmware/wiki/Changelog-RRF-3.x-Beta and https://github.com/Duet3D/RepRapFirmware/wiki/Changelog-RRF-3.x-RC
Ian
TronXY X5S with Duet 3 MB6HC and Roto toolboard : Cartesian bed-slinger with Duet 3 Mini 5+ WiFi and 1LC : RRP Fisher Delta v1 with Duet 2 Maestro : Polargraph with Duet 2 WiFi
-
@droftarts cheers. I'll have a look through that and consider the beta if it's fixed it. I'll need to check out how to force the non-release version onto a SBC setup.
