Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    MultiDuetWebMonitor Trouble

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    3
    3
    129
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • qman3399undefined
      qman3399
      last edited by

      I stumbled upon MultiDWMC while searching for ways to control all of my printers more easily. It doesn't seem to be working anymore and from what I can tell it's from the implementation of CORS on more recent firmware releases. Is there a way around this to get DWMC working again? My printers are running RRF 3.4.0.

      dc42undefined 1 Reply Last reply Reply Quote 1
      • dc42undefined
        dc42 administrators @qman3399
        last edited by

        @qman3399 I don't know anything about MultiDuetWebMonitor, but if it's a CORS issue then the C parameter of the M586 command may be relevant. https://docs.duet3d.com/User_manual/Reference/Gcodes#m586-configure-network-protocols

        Duet WiFi hardware designer and firmware engineer
        Please do not ask me for Duet support via PM or email, use the forum
        http://www.escher3d.com, https://miscsolutions.wordpress.com

        PrintManundefined 1 Reply Last reply Reply Quote 0
        • PrintManundefined
          PrintMan @dc42
          last edited by

          @dc42 I'm waiting for the official release ^^
          https://github.com/Duet3D/DuetPrintFarm

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA