Solved Max file count error

[Ethelred]

I'm getting a "max open file count" error message displays on PanelDue upon system bootup. Supposedly V3.5.0-b4 permits 20 open files. I have only 13 macros total with no nesting. I see no ill effects - printing perfectly. Duet-2 board.

[jay_s_uk]

@Ethelred can you post your config.g and any other called macros as well as daemon.g

[Ethelred]

@jay_s_uk No daemon.g present - config.g below.
Perhaps interesting is that the error message appears on PanelDue only but not on the DWC console window.
config.g

[Phaedrux]

What version is your paneldue firmware?

Do you get the error again if you send M98 P"config.g"?

[Ethelred]

@Phaedrux said in Max file count error:

M98 P"config.g"

PanelDue 1.22.1 (28b1)
M98 P - error flash on both PanelDue and on DWC console screen

[Ethelred]

@Ethelred
Flashed an updated PanelDue binary and all is well - gadzooks, the previous version was pre-historic.
Thanks to all for the help.