3.5 beta 2 M291 S=0 or 1 don't show on Panel Due
-
I'm working on getting our Mark4 printer ready for general maker-space use, which (for us) means user interface through PanelDUe, not DWC.
We've discovered that with current RRF (3.5.1 beta2) and PanelDue FW (3.4.1), M291 messages with S=0 or S=1 are not displayed on the PanelDue. If we have DWC also connected (for debug), we do see these messages on the DWC. This is not the behavior expected per the gcode dictionary. We're working around using M118, but we'd sure like to use M291.
-
And if you roll back to 3.4.5 the behaviour is as expected?
Which Duet board and PanelDue version?
Can you also provide an example M291 command that does this?
-
I tried rolling back to 3.4.5 and the behavior is as expected, the S-0 and S=1 messages are displayed on the PanelDue.
My Duet board is an official MB6HC.
The PanelDue is a 7" V3 clone -
@mikeabuilder thanks for confirming.
-
undefined T3P3Tony moved this topic from Gcode meta commands
-
undefined Phaedrux moved this topic from PanelDue
