M32 Gcode file "/Hindge.gcode" not found
-
Hiall!
I'm finishing a new build and ofcourse I'm sweating exitement to get the beast running. Now there seems to be ODD issue I never faced before in these 2 years of playing with Duets and RRF.
The message shown in the topic pops up, what ever I try to print. Definitely I dont put "/" in the names of my files, but that is the error message.
I have tried several firmware versions but none fixes this, now there is 1.20beta7 in. In desperation I changed the filename into /Hindge but ofcourse it didn't work neither.
What gives? How to fix it? Anybody?
Thanks again
-Jere
-
Are you printing from the SD card on the Duet, or from an external SD card?
Which version of DWC are you using? Version 1.19.3 is current.
-
The card is in the slot on the Duet. 1.20beta7 is the latest try…
-
And which version of DWC?
-
what was DWC again? I use paneldue and the firmware of that is ar least 1,5 years old.
-
DWC = Duet Web Control. Are you telling me that you are selecting the file from PanelDue, not DWC? If so, which version of the Panel Due firmware are you running? Look on the Setup page to find out.
-
yes, paneldue is my UI. I am away from the printer until sunday but it looks like the paneldue fw version is 7.0-1.13 (the newest on my computer to be found)
Funny side of this problem is that there is another printer with exactly same electronics and same paneldue firmware, and that printer has never behaved like this. I tried the same DuetEthernetFirmware version too without solution.
-
I suggest you upgrade the Panel Due firmware from https://github.com/dc42/PanelDueFirmware/releases and see if that resolves the problem.
-
All right. I'll get back on the topic on sunday.
Thanks!
-
Yep that worked!
Super nice
Thanks!
