Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Duet 2 WiFi M564 Issue

    Scheduled Pinned Locked Moved Solved
    Tuning and tweaking
    2
    3
    136
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • JADoglioundefined
      JADoglio
      last edited by JADoglio

      On my printer using a the Duet WiFi board when I run M564 H0 it seems to process fine but it does not activate to move while not homed as the Dashboard does not activate for X Y Z moves. Any reason why this is happening? I included M122 and config.g files in case they might help. Thanks

      M122.txt Config.g.txt

      1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator
        last edited by

        Update your firmware and see if the behaviour is the same. Upload this zip file to the system tab in DWC.

        https://github.com/Duet3D/RepRapFirmware/releases/download/3.4.5/Duet2and3Firmware-3.4.5.zip

        Z-Bot CoreXY Build | Thingiverse Profile

        JADoglioundefined 1 Reply Last reply Reply Quote 0
        • JADoglioundefined
          JADoglio @Phaedrux
          last edited by

          @Phaedrux

          Thanks that solved the problem!

          1 Reply Last reply Reply Quote 0
          • dc42undefined dc42 marked this topic as a question
          • dc42undefined dc42 has marked this topic as solved
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA