PA reportings off in DWC/Object model

[Exerqtor]

I've been doing some PA tuning the last days and i've seen that DWC & / OR the object model rounds up the PA to the be the closest two deciamal number value?
For instance if i set PA to 0.025 DWC / Object model reports 0.03, and if i set PA to 0.035 it reports 0.04?

Screenshots, the black is obviously from the object model browser, while the blue is from the console.

This is happening on RRF /DWC 3.4.5.

[dc42]

@Exerqtor thanks for reporting this. I will increase it from 2 to 3 decimal places in the next release.

[Exerqtor]

@dc42
Sweet, in 3.5 b1? (any eta on that badboy yet btw? seen alot of refering to it popping up in in the docs lately).

[dc42]

@Exerqtor release 3.5beta1 is currently undergoing internal testing. We may release it later today.

There will almost certainly be a 3.4.6 release and the change will be in that one too.