Modix3d 120X - Two gantries
-
Here is my Modix 120X. Today I have finally made it print for the first after I started this conversion about 3 weeks ago using only parts I already have at home.
I plan to convert the electronics to two MB6HC V1.02 connected to each other and run them on 48v . Currently, I use old-fashioned drivers with Duet3 XD which I already have so I tried, but they must be replaced.
RRF3.4.4 configured as an IDEX. In the next month, I am planning to convert one of the gantries to an automatic tool changer utilizing the Printermods Xchange mechanism. -
@ELAD I'm not sure the 6HC v1.02 supports 48v....
Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is
-
@ELAD
I wouldn't dare to build such a huge printer with 2020 extrusions. The bed and gantry must sag a lot? -
@jay_s_uk it will do
-
@T3P3Tony i thought it might be on the cards considering the 3HC already does
