Wifi setup complited and connect to the computer
-
I getting message 1) Attempt to move the head of a delta or scara printer before homing the towers. 2) massage from duet firmware ( config…)
Firmware Name:
RepRapFirmware for Duet WiFiFirmware Electronics:
Duet WiFi 1.0Firmware Version:
1.19.2 (2017-09-01)WiFi Server Version:
1.19Web Interface Version:
1.19
Web Interface by Christian Hammacher
Licensed under the terms of the GPL v3and one more think when I press x axis motor X-100. result rotate X,Y axis Motor both together
M120
G91
G1 X-10 F6000
M121
Attempt to move the head of a Delta or SCARA printer before homing the towers -
You need to generate config.g and homing files to match your printer characteristics, and upload them to the SD card. See https://duet3d.com/wiki/Configuring_RepRapFirmware_for_a_Cartesian_printer. You can use this tool https://configurator.reprapfirmware.org/ to generate them.