d36hc - Configure more temp-sensors?

[pro3d]

So I already have 4 temp sensors attached to the board and need more but the board only has 4 pins for this. Can I configure some other IO to do the job and if so how? Talking about the drybox for the valkyrie

[gloomyandy]

@pro3d If you can't add another thermistor, how about using a DHT sensor the humidity function might come in handy? https://docs.duet3d.com/en/User_manual/Connecting_hardware/Temperature_connecting_DHT

[pro3d]

@gloomyandy said in d36hc - Configure more temp-sensors?:

@pro3d If you can't add another thermistor, how about using a DHT sensor the humidity function might come in handy? https://docs.duet3d.com/en/User_manual/Connecting_hardware/Temperature_connecting_DHT

Can I use that for controlling temperature with a heater? WE already have a temp and humidity sensor bu can I use those to control the heater?

[gloomyandy]

@pro3d Yep should be no problem. I use one to control one of the fans on my toolchanger.

[dc42]

@pro3d you can also use PT100 or thermocouple daughter boards, or CAN-connected expansion boards to connect additional temperature sensors.