Cura thumbnails are not shown

tapirath

Hi all,

Here is a snippet from the latest Cura. Looks like the format seems fine and indeed the image format used is PNG, so I'm not sure why DWC can't view them.

Any ideas?

dc42

@tapirath are you running RRF and DWC 3.4? Also DSF 3.4 if using SBC.

jay_s_uk

Cura 4.13.1 works fine with @resam plugin.
The duet plugin currently doesn't work with cura 5 beta so the thumbnails may not work correctly until the plugin works again

tapirath

@dc42

I'm running 3.4 stable both RRF and DWC. Standalone mode.
The thumbnail is created with the official post-processing plugin of cura.

@jay_s_uk I'm not sure it has anything to do with Cura version. It's the exact same post-processing script.

tapirath

Here is the link to the script: https://github.com/Ultimaker/Cura/blob/master/plugins/PostProcessingPlugin/scripts/CreateThumbnail.py

You can switch between master and 5.0 branch. It looks same to me.

resam

Cura-DuetRRF Plugin for Cura V5 is already submitted for review by the Ultimaker Marketplace team - usually takes a few days before the approve and its available. Until then, you can use the manual installation method from the next branch of the plugin - and download the zip file also from the next branch: https://github.com/Kriechi/Cura-DuetRRFPlugin/tree/next#manual-installation

tapirath

@resam

Maybe I'm missing an information here but my problem has no relevance to the Cura RRF plugin. I don't use that plugin. This is a post-processing script that embeds the thumbnail in the gcode and I upload the gcode manually via DWC.

resam

@tapirath I didn't specifically comment about your case - just general information.

But regarding your case: the post-processing script is not generating valid thumbnail comments:
https://github.com/Ultimaker/Cura/blob/5330e53ae60030d6ac4061642e818fb40ffafcb1/plugins/PostProcessingPlugin/scripts/CreateThumbnail.py#L40

the width and height need to be separated by an x, not a space character. At least that's what the plugin is doing - and its working there.

tapirath

@dc42 would you be willing to fix it on your end or should report to Cura?

resam

@tapirath thats a Cura problem - so please report it to them. I'm not even sure if they built this specifically to be compatible with Duet / RepRapFirmware.

tapirath

@resam said in Cura thumbnails are not shown:

it to them. I'm not even sure if they built this specifically to be compatible with Duet / RepR

done: https://github.com/Ultimaker/Cura/pull/11917

tapir opened this pull request in Ultimaker/Cura

closed Fix thumbnail format #11917

dc42

@resam said in Cura thumbnails are not shown:

@tapirath I didn't specifically comment about your case - just general information.

But regarding your case: the post-processing script is not generating valid thumbnail comments:
https://github.com/Ultimaker/Cura/blob/5330e53ae60030d6ac4061642e818fb40ffafcb1/plugins/PostProcessingPlugin/scripts/CreateThumbnail.py#L40

the width and height need to be separated by an x, not a space character. At least that's what the plugin is doing - and its working there.

Yes, RRF expects a 'x' between the width and height (which is what PrusaSlicer generates), not a space. Best get it fixed in Cura because it may not only affect RRF.