Unable to make first print, Error: M32:
-
-
Board: Duet 3 MB6HC (MB6HC)
DSF Version: 3.4.0
Firmware: RepRapFirmware for Duet 3 MB6HC 3.3 (2021-06-15)I can now confirm it will print if I upload the Gcode as a Macro, just not as a "job"
-
I am still using 3.3.0 so there may be a problem with 3.4.0 that I am not aware of.
Frederick
-
undefined burtonenator marked this topic as a question
-
@burtonenator just to sanity check: you are running RRF 3.3 but using DSF 3.4? I would recommend upgrading/downgrading to the same version for both - having such a mix might cause weird issues.
-
@resam
I did the update on the pi, is there more I should do, everything seems to imply all I have to do is:sudo apt update
sudo apt upgrade -
@burtonenator yes, thats the usual way - but if your system is reporting two different versions for RRF and DSF, then something went wrong.
-
Yes!, that seems to be it I got the board to upgrade to 3.4 and now its accepting a file, thank you.
-
undefined burtonenator has marked this topic as solved
-
The same problem occurred to me.
Do you happen to know how to downgrade 3.4 to 3.3?
I don't know how to do it. -
@geon-han_kang In this case they had a mismatch between DSF version and Duet firmware version.
-
@geon-han_kang I had to upgrade the duet3 to 3.4, there is a script that can help you downgrade the DSF, but I didn't use it, I wanted something from 3.4 anyways.
-
@burtonenator
Thank you.
I try that
