what code to modify for z motors ,one on z and one on e1

[fcwilt]

@dallash said in what code to modify for z motors ,one on z and one on e1:

@fcwilt . ok so i got the changes made, but when i start the duet 2 wifi and try to home , it does nothing except says files on card 0

So you are saying your config.g file is gone?

Frederick

[DallasH]

@fcwilt if i connect wit yat dwc comes up and everything looks correct, but when i try to home or make any commands via the panel due nothing happens except a pop up that says files on card 0. i installed the latest firmware, i also tried formatting a new sd card with the /firmware and /sys files from the zipped config all in 1 download, still behaves the same

[fcwilt]

@dallash said in what code to modify for z motors ,one on z and one on e1:

@fcwilt if i connect wit yat dwc comes up and everything looks correct, but when i try to home or make any commands via the panel due nothing happens except a pop up that says files on card 0. i installed the latest firmware, i also tried formatting a new sd card with the /firmware and /sys files from the zipped config all in 1 download, still behaves the same

So you cannot connect to the DWC via a browser?

Frederick

[DallasH]

@fcwilt no

[DallasH]

@dallash always says connecting

[DallasH]

@dallash i'm giving up for today. thanks

[Phaedrux]

I suggest you start here: https://docs.duet3d.com/en/How_to_guides/Getting_connected/Getting_connected_to_your_Duet

[DallasH]

@phaedrux I cant connect even with yat now. i get this error when trying to update drivers

[DallasH]

@dallash and this error when trying to start yat! DUET ERROR2.JPG

[Phaedrux]

What OS?

[DallasH]

@phaedrux win 7 ultimate, 64 bit

[Phaedrux]

That's a blast from the past. Does anything new show up in device manager even without the driver?

[DallasH]

@phaedrux ok i finally got everything talking, everything works from dwc thru a wifi browser, but nothing works from the panel due, display looks fine, but if you touch home it pops up a screen that says files on card 0. i can find nothing that responds from the panel due

[fcwilt]

@dallash said in what code to modify for z motors ,one on z and one on e1:

@phaedrux ok i finally got everything talking, everything works from dwc thru a wifi browser, but nothing works from the panel due, display looks fine, but if you touch home it pops up a screen that says files on card 0. i can find nothing that responds from the panel due

Does the PanelDue have the correct firmware required by the current Duet firmware?

Frederick

[DallasH]

@fcwilt panel due v3.0a 5i display firmware 1.17 not sure what firmware to use with rrf 3.4! would this be correct ? (PanelDueFirmware-3.4.1-pre1-v3-5.0.bin)
IMG_0006.jpg

[fcwilt]

@dallash said in what code to modify for z motors ,one on z and one on e1:

@fcwilt panel due v3.0a 5i display firmware 1.17 not sure what firmware to use with rrf 3.4! would this be correct ? (PanelDueFirmware-3.4.1-pre1-v3-5.0.bin)
IMG_0006.jpg

Here is some information:

https://docs.duet3d.com/User_manual/RepRapFirmware/Updating_PanelDue

Frederick

[DallasH]

@fcwilt I UPDATED the panel due firmware. but still have unresponsive panel due.

[Phaedrux]

Add this line to the beginning of your config.g M575 P1 B57600 S1

And change the baud setting on your PanelDue settings to 57600 to match.

[fcwilt]

@dallash

Well it's still not connecting.

First thing to check would be the wiring.

How do you have it connected?

Frederick

[DallasH]

@phaedrux AWESOME! THAT DID THE TRICK! THANKS SO MUCH!!!!