Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Need help with my delta please.

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    5
    48
    1.5k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • azaelaguirreundefined
      azaelaguirre @alankilian
      last edited by

      @alankilian
      yes is cura ! thnks a lot! i hope u help me

      1 Reply Last reply Reply Quote 0
      • azaelaguirreundefined
        azaelaguirre @fcwilt
        last edited by

        @fcwilt cura !

        alankilianundefined fcwiltundefined 2 Replies Last reply Reply Quote 0
        • alankilianundefined
          alankilian @azaelaguirre
          last edited by alankilian

          @azaelaguirre Man, I downloaded Cura and I can't make any sense of the interface.

          SOMEWHERE there's supposed to be "Machine" settings that have start and stop GCODE but I can't find it at all.

          Seems to be a disconnect between web instructions and the current revision of slicer.

          I'm sorry, but I've reached the limit of what I can help with since I'm not a Cura use.

          You'll need to figure out why Cura is adding bed-probing GCODE at the beginning of your print and correct the errors in that code.

          I'm sure a Cura user can help you.

          SeemeCNC Rostock Max V3 converted to V3.2 with a Duet2 Ethernet Firmware 3.2 and SE300

          azaelaguirreundefined 1 Reply Last reply Reply Quote 1
          • azaelaguirreundefined
            azaelaguirre @alankilian
            last edited by

            @alankilian

            I thank you for trying!

            1 Reply Last reply Reply Quote 0
            • fcwiltundefined
              fcwilt @azaelaguirre
              last edited by

              @azaelaguirre said in Need help with my delta please.:

              See below from the Machine Settings page in Cura

              • What G-code flavor is displayed:

              • What Start G-code is displayed:

              Cura Machine Settings.png

              Printers: A FT-5 with the 713 upgrade bits, a custom MarkForged style, a small Utilmaker style, a small CoreXY from kit and a E3D MS/TC setup. Various hotends. Using Duets (2 and 3) running 3.4.6

              azaelaguirreundefined 1 Reply Last reply Reply Quote 1
              • azaelaguirreundefined
                azaelaguirre @fcwilt
                last edited by

                @fcwilt
                i dont know what im do but its working now !!! hahahaha

                update cura and the commands were removed and now it is printing, thank you all for your time and help

                fcwiltundefined 1 Reply Last reply Reply Quote 1
                • fcwiltundefined
                  fcwilt @azaelaguirre
                  last edited by

                  @azaelaguirre said in Need help with my delta please.:

                  @fcwilt
                  i dont know what im do but its working now !!! hahahaha

                  update cura and the commands were removed and now it is printing, thank you all for your time and help

                  Be sure the G-code flavor setting is RepRap.

                  Frederick

                  Printers: A FT-5 with the 713 upgrade bits, a custom MarkForged style, a small Utilmaker style, a small CoreXY from kit and a E3D MS/TC setup. Various hotends. Using Duets (2 and 3) running 3.4.6

                  azaelaguirreundefined 1 Reply Last reply Reply Quote 1
                  • azaelaguirreundefined
                    azaelaguirre @fcwilt
                    last edited by

                    @fcwilt yes change it to cura, it comes with marlin by default

                    1 Reply Last reply Reply Quote 0
                    • First post
                      Last post
                    Unless otherwise noted, all forum content is licensed under CC-BY-SA