@fcwilt
i dont know what im do but its working now !!! hahahaha

update cura and the commands were removed and now it is printing, thank you all for your time and help

whyI have to calibrate my machine every time I restart it, the calibration data is not saved.

@fcwilt yes change it to cura, it comes with marlin by default

@fcwilt
i dont know what im do but its working now !!! hahahaha

update cura and the commands were removed and now it is printing, thank you all for your time and help

@alankilian

I thank you for trying!

@fcwilt cura !

@alankilian
yes is cura ! thnks a lot! i hope u help me

@alankilian

I'm sorry I'm intermediate level in this, I don't know how to solve what you say

I don't know where to check because the slicer puts that there

@alankilian

;FLAVOR:Repetier
;TIME:822
;MINX:-13.8
;MINY:-13.8
;MINZ:0.3
;MAXX:13.8
;MAXY:13.8
;MAXZ:19.9
;Generated with Cura_SteamEngine 4.2.1
M190 S60
M104 S200
M109 S200
M82 ;absolute extrusion mode
M280 S10.6
G28
M280 S3
G1 Z50 F25000
G92 E0
G1 F200 E3
G92 E0
G30 Z1.2
M280 S7
G1 X0 Y0 Z100
M42
M141 S28
G92 E0
G92 E0
G1 F1800 E-5
;LAYER_COUNT:99
;LAYER:0
M107
G0 F4320 X13.8 Y-10 Z0.3
;TYPE:SKIRT
G1 F1800 E0
G1 X13.8 Y10 E0.9978
G1 X13.76 Y10.55 E1.02532
G1 X13.641 Y11.088 E1.05281
G1 X13.445 Y11.603 E1.0803
G1 X13.177 Y12.084 E1.10777
G1 X12.843 Y12.522 E1.13525

@alankilian
im delete that line and this happen:

17/2/2022, 17:41:37 Error: Probe was not triggered during probing move
Error: in GCode file line 43: M280: missing parameter 'P'
17/2/2022, 17:41:10 Error: Bad command: deploy BLTouch
17/2/2022, 17:41:07 Error: in GCode file line 31: M280: missing parameter 'P'
17/2/2022, 17:41:05 Error: in GCode file line 27: M280: missing parameter 'P'

@phaedrux
something new, try to print something and this happens:

17/2/2022, 17:25:22 Error: Probe was not triggered during probing move
Error: in GCode file line 43: M280: missing parameter 'P'
17/2/2022, 17:24:52 Error: in GCode file line 31: M280: missing parameter 'P'
17/2/2022, 17:24:50 Error: in GCode file line 27: M280: missing parameter 'P'