Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Need help with my delta please.

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    5
    48
    1.5k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • azaelaguirreundefined
      azaelaguirre @alankilian
      last edited by

      @alankilian

      I'm sorry I'm intermediate level in this, I don't know how to solve what you say 😞

      I don't know where to check because the slicer puts that there

      fcwiltundefined 1 Reply Last reply Reply Quote 0
      • fcwiltundefined
        fcwilt @azaelaguirre
        last edited by

        @azaelaguirre said in Need help with my delta please.:

        @alankilian

        I'm sorry I'm intermediate level in this, I don't know how to solve what you say 😞

        I don't know where to check because the slicer puts that there

        What slicer are you using?

        Frederick

        Printers: A FT-5 with the 713 upgrade bits, a custom MarkForged style, a small Utilmaker style, a small CoreXY from kit and a E3D MS/TC setup. Various hotends. Using Duets (2 and 3) running 3.4.6

        azaelaguirreundefined 1 Reply Last reply Reply Quote 1
        • alankilianundefined
          alankilian @azaelaguirre
          last edited by

          @azaelaguirre said in Need help with my delta please.:

          ;Generated with Cura_SteamEngine 4.2.1

          I guess I can download Cura and see what it looks like.

          SeemeCNC Rostock Max V3 converted to V3.2 with a Duet2 Ethernet Firmware 3.2 and SE300

          azaelaguirreundefined 1 Reply Last reply Reply Quote 1
          • azaelaguirreundefined
            azaelaguirre @alankilian
            last edited by

            @alankilian
            yes is cura ! thnks a lot! i hope u help me

            1 Reply Last reply Reply Quote 0
            • azaelaguirreundefined
              azaelaguirre @fcwilt
              last edited by

              @fcwilt cura !

              alankilianundefined fcwiltundefined 2 Replies Last reply Reply Quote 0
              • alankilianundefined
                alankilian @azaelaguirre
                last edited by alankilian

                @azaelaguirre Man, I downloaded Cura and I can't make any sense of the interface.

                SOMEWHERE there's supposed to be "Machine" settings that have start and stop GCODE but I can't find it at all.

                Seems to be a disconnect between web instructions and the current revision of slicer.

                I'm sorry, but I've reached the limit of what I can help with since I'm not a Cura use.

                You'll need to figure out why Cura is adding bed-probing GCODE at the beginning of your print and correct the errors in that code.

                I'm sure a Cura user can help you.

                SeemeCNC Rostock Max V3 converted to V3.2 with a Duet2 Ethernet Firmware 3.2 and SE300

                azaelaguirreundefined 1 Reply Last reply Reply Quote 1
                • azaelaguirreundefined
                  azaelaguirre @alankilian
                  last edited by

                  @alankilian

                  I thank you for trying!

                  1 Reply Last reply Reply Quote 0
                  • fcwiltundefined
                    fcwilt @azaelaguirre
                    last edited by

                    @azaelaguirre said in Need help with my delta please.:

                    See below from the Machine Settings page in Cura

                    • What G-code flavor is displayed:

                    • What Start G-code is displayed:

                    Cura Machine Settings.png

                    Printers: A FT-5 with the 713 upgrade bits, a custom MarkForged style, a small Utilmaker style, a small CoreXY from kit and a E3D MS/TC setup. Various hotends. Using Duets (2 and 3) running 3.4.6

                    azaelaguirreundefined 1 Reply Last reply Reply Quote 1
                    • azaelaguirreundefined
                      azaelaguirre @fcwilt
                      last edited by

                      @fcwilt
                      i dont know what im do but its working now !!! hahahaha

                      update cura and the commands were removed and now it is printing, thank you all for your time and help

                      fcwiltundefined 1 Reply Last reply Reply Quote 1
                      • fcwiltundefined
                        fcwilt @azaelaguirre
                        last edited by

                        @azaelaguirre said in Need help with my delta please.:

                        @fcwilt
                        i dont know what im do but its working now !!! hahahaha

                        update cura and the commands were removed and now it is printing, thank you all for your time and help

                        Be sure the G-code flavor setting is RepRap.

                        Frederick

                        Printers: A FT-5 with the 713 upgrade bits, a custom MarkForged style, a small Utilmaker style, a small CoreXY from kit and a E3D MS/TC setup. Various hotends. Using Duets (2 and 3) running 3.4.6

                        azaelaguirreundefined 1 Reply Last reply Reply Quote 1
                        • azaelaguirreundefined
                          azaelaguirre @fcwilt
                          last edited by

                          @fcwilt yes change it to cura, it comes with marlin by default

                          1 Reply Last reply Reply Quote 0
                          • First post
                            Last post
                          Unless otherwise noted, all forum content is licensed under CC-BY-SA