Need help with my delta please.

[alankilian]

@azaelaguirre OK, see those M280 commands in there?

You'll need to go to your slicer and figure out why its putting them in there and stop that action.

OR if they are required, modify your slicer code to add the pin number appropriately.

[azaelaguirre]

@alankilian

I'm sorry I'm intermediate level in this, I don't know how to solve what you say

I don't know where to check because the slicer puts that there

[fcwilt]

@azaelaguirre said in Need help with my delta please.:

@alankilian

I'm sorry I'm intermediate level in this, I don't know how to solve what you say

I don't know where to check because the slicer puts that there

What slicer are you using?

Frederick

[alankilian]

@azaelaguirre said in Need help with my delta please.:

;Generated with Cura_SteamEngine 4.2.1

I guess I can download Cura and see what it looks like.

[azaelaguirre]

@alankilian
yes is cura ! thnks a lot! i hope u help me

[azaelaguirre]

@fcwilt cura !

[alankilian]

@azaelaguirre Man, I downloaded Cura and I can't make any sense of the interface.

SOMEWHERE there's supposed to be "Machine" settings that have start and stop GCODE but I can't find it at all.

Seems to be a disconnect between web instructions and the current revision of slicer.

I'm sorry, but I've reached the limit of what I can help with since I'm not a Cura use.

You'll need to figure out why Cura is adding bed-probing GCODE at the beginning of your print and correct the errors in that code.

I'm sure a Cura user can help you.

[azaelaguirre]

@alankilian

I thank you for trying!

[fcwilt]

@azaelaguirre said in Need help with my delta please.:

See below from the Machine Settings page in Cura

• What G-code flavor is displayed:

• What Start G-code is displayed:

[azaelaguirre]

@fcwilt
i dont know what im do but its working now !!! hahahaha

update cura and the commands were removed and now it is printing, thank you all for your time and help

[fcwilt]

@azaelaguirre said in Need help with my delta please.:

@fcwilt
i dont know what im do but its working now !!! hahahaha

update cura and the commands were removed and now it is printing, thank you all for your time and help

Be sure the G-code flavor setting is RepRap.

Frederick

[azaelaguirre]

@fcwilt yes change it to cura, it comes with marlin by default