Tutorial on how to build and set up a delta printer?

[Velvia]

I'm building a 350mm delta printer with 500mm arms, but am unsure about a few things, especially setting up firmware correctly. I have a duet 3, smart effector and optical endstops. Is there a guide, video or tutorial on how to connect everything and set up firmware? The wiki is a bit overwhelming to me.

[rjenkinsgb]

Which Duet3 board is it?

I built a Kossel XL+ based on DC42s design a couple of months ago, using a Duet3 6HC board.

That has a Smart effector but switches rather than optical endstops - my CoreXY machine has optical though, so I can show the connections for those.

You are welcome to a copy of the Delta config & photos of the board connections etc., if those are of use?

[Phaedrux]

Have you seen these?

https://docs.duet3d.com/en/User_manual/Machine_configuration/Configuration_linear_delta

https://docs.duet3d.com/en/User_manual/Tuning/Delta_calibration