Chamber temperature reporting
-
I would like to see chamber temp listed in DWC, I am usind Duet2Wifi
I will be pluggin in a E3D thermistor into the S2 Thermistor slot
Board: Duet 2 WiFi (2WiFi)
Firmware: RepRapFirmware for Duet 2 WiFi/Ethernet 3.4.0beta6 (2021-11-06)
Duet WiFi Server Version: 1.25; Heaters M308 S0 P"bedtemp" Y"thermistor" T100000 B4138 ; configure sensor 0 as thermistor on pin bedtemp M950 H0 C"bedheat" T0 ; create bed heater output on bedheat and map it to sensor 0 M140 H0 ; Map heated bed to heater 0 M143 H0 S120 ; set temperature limit for heater 0 to 120C M307 H1 B0 R1.591 C187.0:154.2 D7.57 S1.00 V24.1 M308 S1 P"e0temp" Y"thermistor" T100000 B4725 C7.06e-8 ; configure sensor 1 as thermistor on pin e0temp M950 H1 C"e0heat" T1 ; create nozzle heater output on e0heat and map it to sensor 1 M143 H1 S285 ; set temperature limit for heater 1 to 280C M307 H1 R1.71 C175.5:157.9 D5.73 S1.00 V24.1 ;Chamber Temp M308 S2 P"Chamber" Y"thermistor" T100000 B4725 C7.06e-8 A"Chamber" -
Do you mean in the temp graph? In the tools selector area click on EXTRA. do you see the additional sensor listed there with a check box to add it to the graph?
-
@phaedrux I dont see the tool listed when I click there
-
Can you post the rest of your config.g?
Is that all you have for your chamber heater? Is it actively heated, or just a temp monitor?
See the example here:
https://duet3d.dozuki.com/Wiki/Connecting_and_configuring_a_chamber_heater#Section_RepRapFirmware_3_x_and_laterM308 S2 P"e1temp" Y"thermistor" T100000 B4138 ; configure sensor 2 as thermistor on pin e1temp M950 H2 C"e1heat" T2 ; create chamber heater output on e1heat and map it to sensor 2 M307 H2 B0 S1.00 ; disable bang-bang mode for the chamber heater and set PWM limit M141 H2 ; map chamber to heater 2 M143 H2 S100 ; set temperature limit for heater 2 to 100C -
@adamfilip said in Chamber temperature reporting:
M308 S2 P"Chamber" Y"thermistor" T100000 B4725 C7.06e-8 A"Chamber"
Check the "P" parameter. On a Duet 2 WiFi, "Chamber" is not a valid pin.
