1.19 from bossa port
-
Ok.. I came from some months with the board stored…. So I clicked the erase button.
Can someone point me to the new 1.19 procedure.? I can't make the wifi work.
-
-
I installed the main firmware with sam-ba but couldn't make it work… Now I see I have to load the wifi module firmware and then dwc on the SD card...
Version x.17 of sam-ba ask me to lock some sectors.. What do you recommend over that?
-
Yes lock them, see https://duet3d.com/wiki/Updating_main_firmware#Fallback_procedure_.233.
-
just a side note:
DuetWebControl is needed to run the M997 successfully…
-
just a side note:
DuetWebControl is needed to run the M997 successfully…
You can send that command from USB or PanelDue too. The USB connection will be dropped but the firmware update will proceed.
-
sorry… forgot to update
