Gcode to remove heater

[sarvan]

Hello Everyone,
Finally I managed to co figure my duet wifi with 895 motor. I want clarify one thing as I can remove the bed heater by M140 H-1, how can I remove hotend? Cause, during CNC mode still my hotend there.

Thanks

[dc42]

@sarvan I assume you are running RRF 3.2 or later. In your M563 tool definition, don't have any H parameter.

[sarvan]

@dc42 yes. Running on 3.3. Here my code like in M563 line,
M950 R0 C"fan2 ...
M563 P2 R0 S"Spindle. Can I use any code to remove heater(hot end)

[sarvan]

@dc42 yeah, I have to check again, I think I don't have any H parameters