Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    RepRapFirmware 3.3 upgrade issues

    Scheduled Pinned Locked Moved
    Firmware installation
    3
    3
    173
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Handymanpa54undefined
      Handymanpa54
      last edited by

      Hello All,
      Do I need to modify config.g to get RepRapFirmware 3.3 to work? When rebooting to this software I loose connection to DWC?? So I dropped back to RepRapFirmware 3.2 and all is ok.

      Mark

      engikeneerundefined 1 Reply Last reply Reply Quote 0
      • engikeneerundefined
        engikeneer @Handymanpa54
        last edited by

        @handymanpa54 DWC is hosted on the Duet, so if you reboot it will drop connection, but should reconnect within a few seconds. Is that what you're seeing?

        Home-built CoreXY, Duet Wifi, Chimera direct drive, 2x BMG, 300x300x300 build volume
        i3 clone with a bunch of mods

        1 Reply Last reply Reply Quote 0
        • Phaedruxundefined
          Phaedrux Moderator
          last edited by

          How are you doing the firmware update?

          When you're using 3.2 and have access to DWC upload the full 3.3 zip file to make sure you have everything updated at once.

          https://github.com/Duet3D/RepRapFirmware/releases/download/3.3/Duet2and3Firmware-3.3.zip

          Z-Bot CoreXY Build | Thingiverse Profile

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA