G29 on a delta, no probe offset?
-
Hello, I am working with a delta machine and a bltouch probe.
The probe offset is X-40 from the nozzle (I set it up in my G31 X-40 Y0 Z2.32 P25).
Here http://escher3d.com/pages/wizards/wizardbed.php i can set my probe offset and the test points seems to be perfect for G32 but, is there any way to indicate my probe offset for bed meshing? (G29).
I can set only printable radius and distance from probes but not where to probe:
M557 R110 S20
so when is running G29, with the left points, bltouch is outside of the bed.
Thanks and sorry my english. -
Check that you don't have another G31 command in bed.g that sets the probe offset to zero. This was required with some old firmware versions, but isn't any more.
