3.3.0 have you changed how M84 works ?

[peter247]

Not a biggie ,but I'm getting a error which I didn't get in 3.2.2 , which I know how to fix I think with E0 .

Error: in GCode file line 155983 column 10: M84: expected number after 'E'
Finished printing file 0:/gcodes/E5P_fan_PLA.gcode, print time was 1h 6m

Which I always used : M84 X Y E ;Disable all steppers but Z

[dc42]

@peter247 M84 has always taken a list of extruder numbers after the E parameter. In previous firmware, if you omitted a number where one was expected, 0 was assumed. That is no longer the case.